PowerPoint under here
https://docs.google.com/file/d/0B3Ui0luZ7lOvcWhzeHdBWGhrSGs/edit?usp=sharing
Monday, 21 October 2013
How to set up an interview - Evaluation
We encountered some faults in out editing process and also during our filming. We quickly worked together to overcome these problems. We over came this by only using the footage from the camera which came with sound. One of the problems was that our actor forgot his lines, we gave him time to learn them but that delayed our filming. We also were given an idea for more footage, after we packed the equipment away, which delayed the start of editing.
We successfully captured enough film for us to begin editing. The director and producer looked over the films to make sure. We began editing and found an appropriate sound track to use. One of the problems in editing that we encountered was trying to sync the film from the two cameras, one of which didn't record sound. Another problem during editing we found that the actor looked away from the camera and said sentences more than once. We came over this problem by inserting fillers over these mistakes.
Monday, 7 October 2013
Production Gear
A motion picture camera captures a rapid sequence of pictures on a roll of film, called a strip of film. Louis le Prince first patented the motion capture camera in 1888 it originally had to be manually turned.
Early movies had a frame rate of 14-20 frames per second. Kodak in 1923 launched 16mm film stock for cameras as a lower cost alternative than 35mm. This was used by many amateur filmmakers. In the 1930's where made with digital cameras by the BBC, using cathode ray tubes. Most colour cameras came about in the 50's and 60's. Over time cameras became smaller and more compact.
The development of sorting information changed drastically over the years. In the 20th century we relied on videotape based analogue formats such as VHS and Betamax. Early 2000's MiniDV was a digital type based format but was soon followed by DVD, hard disk drive and finally SD card/compact/solid state flash based recording. MiniDV allowed for 720x576 (Standard definition) recording in PAL (0.4 megapixels). Current consumer cameras allow for full high definition which is 1920x1080 (2 megapixels). The current including film standard is 35mm, which dependant on quality, can range between 10-24 megapixels or even higher. The current industry digitally standard is 4K which is 12 megapixels. However, some films are currently being shot at 6K (19 megapixels)
Film is inside of the camera (Completely dark at this point). The shutter opens, and light travels though the lens, exposing the film or sensor. The shutter closes, and the light is focused onto the film.
The sensor size of a digital camera has a big impact on the look big impact on the look and quality of an image. This is why DSLR's have made such a huge impact on the film industry. It has allowed for affordable filmmaking.
The general rule rule of sensors are...
If its smaller, it will have a higher frame rate capability, but produce more gain in darker situations. If its larger it will produce a better quality images and handle dark situations much better.
There are three main functions of controlling the way an image is exposed correctly with a camera. shutter speed (How quickly an image is captured) Aperture (Controls DoF) ISO (sensitivity).
Lighting is the important for film, as it makes the image more interesting. It creates depth, creating the illusion of a three dimensional image subject inside the frame (two dimensional). If your shooting out side the best option is to use reflectors.
The most common lighting setup is the "3 point"
The key for good sound is to ensure the microphone is facing your actor, and that your sound levels on the recording are peaking, but not hitting maximum, otherwise the sound will distort.
There are three microphones commonly used.
Shotgun microphone - it is highly directional and picks up the most sound from where its pointing
Dynamic microphone - roughed and resistent to moisture mostly used for on stage performances
Condenser microphone
Early movies had a frame rate of 14-20 frames per second. Kodak in 1923 launched 16mm film stock for cameras as a lower cost alternative than 35mm. This was used by many amateur filmmakers. In the 1930's where made with digital cameras by the BBC, using cathode ray tubes. Most colour cameras came about in the 50's and 60's. Over time cameras became smaller and more compact.
The development of sorting information changed drastically over the years. In the 20th century we relied on videotape based analogue formats such as VHS and Betamax. Early 2000's MiniDV was a digital type based format but was soon followed by DVD, hard disk drive and finally SD card/compact/solid state flash based recording. MiniDV allowed for 720x576 (Standard definition) recording in PAL (0.4 megapixels). Current consumer cameras allow for full high definition which is 1920x1080 (2 megapixels). The current including film standard is 35mm, which dependant on quality, can range between 10-24 megapixels or even higher. The current industry digitally standard is 4K which is 12 megapixels. However, some films are currently being shot at 6K (19 megapixels)
Film is inside of the camera (Completely dark at this point). The shutter opens, and light travels though the lens, exposing the film or sensor. The shutter closes, and the light is focused onto the film.
The sensor size of a digital camera has a big impact on the look big impact on the look and quality of an image. This is why DSLR's have made such a huge impact on the film industry. It has allowed for affordable filmmaking.
The general rule rule of sensors are...
If its smaller, it will have a higher frame rate capability, but produce more gain in darker situations. If its larger it will produce a better quality images and handle dark situations much better.
There are three main functions of controlling the way an image is exposed correctly with a camera. shutter speed (How quickly an image is captured) Aperture (Controls DoF) ISO (sensitivity).
Lighting is the important for film, as it makes the image more interesting. It creates depth, creating the illusion of a three dimensional image subject inside the frame (two dimensional). If your shooting out side the best option is to use reflectors.
The most common lighting setup is the "3 point"
The key for good sound is to ensure the microphone is facing your actor, and that your sound levels on the recording are peaking, but not hitting maximum, otherwise the sound will distort.
There are three microphones commonly used.
Shotgun microphone - it is highly directional and picks up the most sound from where its pointing
Dynamic microphone - roughed and resistent to moisture mostly used for on stage performances
Condenser microphone
Subscribe to:
Posts (Atom)